Rotorflush Sapphire 600AR filterpumps are high pressure submersible pumps suitable for general industrial and agricultural applications.
Their 600mm diameter stainless steel self-cleaning intake screen can be manufactured from 304 or 316 stainless steel. The powerful three phase motors offer high pressure pumping while the self-cleaning intake screens protect the intake and pump from blockage.
The Sapphire range 600AR filterpumps use Rotorflush's unique self-cleaning intake filter technology. They deliver an uninterrupted supply of water while a continuous backwash keeps the intake, pump and other downstream equipment blockage free.
These filterpumps offer fine or coarse filtration up to 3mm while pumping up to 1500 litres a minute. They provide the same low maintenance and efficient intake screening as all our submersible filterpumps.
Pump and filter in one unit, screening from 315 microns to 3 mm
Effective low maintenance filtration
120 cubic metres per hour maximum flow
EA Eel Regulation compliant up to 94 m3 / hour (fitted with 2 mm mesh)
20 m maximum operating depth
Maximum head 204 metres
Reduced capital, installation and maintenance
Sapphire Range 600AR Filterpumps
Models & Specification
Sapphire Range 600AR Submersible Pumps with Built-in Self-cleaning Intake Screens
The Sapphire 600AR range is a range of industrial medium to high pressure self-cleaning submersible filterpumps offering up to 1500 litres per minute (90 m3 / hr). These filterpumps are very robust, they are all cast iron with a 304 stainless steel outer casing and a 400mm 304 stainless steel self-cleaning intake. They deliver up to 1500 litres minute of filtered water which is screened as you pump. The stainless steel self-cleaning mechanism in the intake intake lets you combine pumping and screening from source without the screen or pump blocking. They are ideal for screening and moving large volumes of dirty water at higher pressures.
Sapphire Range 600AR filterpumps self-cleaning intakes prevent debris entering the pump and keep debris off the filter screen. They can be fitted with a range of mesh sizes:
315 micron stainless steel sintered filter mesh
1mm or 2mm woven stainless steel mesh
3mm perforated steel mesh.
Filterpump self-cleaning intakes can be manufactured in 316 stainless steel if required. All our steel filter mesh is 316 stainless steel. Sapphire filterpumps offer high pressure and high flow rates.
Need a higher Pressure Filterpump?
Sapphire Range 600AR Filterpumps – Performance and Power
Sapphire Model
Volts
Hz*
Output kW
Rated Current Amps
Outlet mm
Max m3 / hr
Max Head (metres)
Manual or Auto
Phase
SXN40/2-11 600AR
400
50
11
22
80
90
63
Manual
3 phase
SXN40/3-15 600AR
400
50
15
31
80
90
90
Manual
3 phase
SXN60/2-15 600AR
400
50
15
31
100
90
73
Manual
3 phase
SXN40/3-18.5 600AR
400
50
18.5
37.2
80
90
108
Manual
3 phase
SXN60/2-18.5 600AR
400
50
18.5
37.2
100
90
81
Manual
3 phase
SXN40/4-22 600AR
400
50
22
45
80
90
142
Manual
3 phase
SXN40/4-25 600AR
400
50
25
51
80
90
122
Manual
3 phase
SXN60/3-25 600AR
400
50
25
51
100
90
123
Manual
3 phase
*60 Hz versions may be available – please ask.
Please note as standard these filterpumps are fitted with 15 m cable.
Sapphire Range submersible pumps have three phase motors and are fitted with self-cleaning suction intake screens.
NB: It is very important that three phase motor filterpumps are connected to their power source correctly, to ensure that the pump motor runs in the right direction. When pumps run backwards they are inefficient and the motor may be damaged. To see how to test that the pump is wired correctly watch this video.
Please note that we strongly recommend the use of Control Panels and / or a Din Rail mounted Cos Phi Load Monitor with all 3 phase models to prevent damage to pumps.
Installing adequate load monitoring is a condition of our guarantee for these products.
Sapphire Range Submersible Pumps – Performance Curves
Sapphire 600AR Range Submersible Pumps – Dimensions
Rotorflush filterpumps work best with good clearance all around the self-cleaning intake filter.
We can fit stands to suit.
Please Note: Our filters are designed for use in dirty water or liquids with a viscosity close to that of water. Our filters and filterpumps are NOT suitable for use in raw sewage or any other dirty water which contains oils or fat.
Ordering
Sapphire Range Submersible Pumps up to 1500 litres / min
Submersible pumps with integral self-cleaning suction intake filters (three phase 415v 50Hz)
Sapphire Model
Prices
SXN40/2-11 600AR
£17,250.00
SXN40/3-15 600AR
£20,130.00
SXN60/2-15 600AR
£18,500.00
SXN40/3-18.5 600AR
£19,175.00
SXN60/2-18.5 600AR
£19,175.00
SXN40/4-22 600AR
£21,490.00
SXN40/4-25 600AR
£21,960.00
SXN60/3-25 600AR
£21,150.00
All prices are exc. of VAT and Carriage
POA
Please note:
All our products are manufactured to order
Delivery is by carrier. Contact us for latest lead times.
Carriage and packing charges are extra.
Contact us – use this form or call 0044 (0)1297 560229
Downloads
Below is the technical and maintenance information for the Sapphire Range 600AR Filterpumps
Our RUBI Range submersible filter pumps offer fine and coarse filtration while pumping up to 600 and 1000 litres per minute. Industrial pumping and filtration combined.
Our Cobalt Range 600AR submersible filter pumps offer fine and coarse filtration while pumping up to 1800 litres per minute. Low maintenance industrial pumping and filtration combined in one self-cleaning unit, pump and screen are kept blockage free,
Our Sapphire Range 400AR submersible filter pumps offer fine and coarse filtration while pumping up to 1000 litres per minute. Low maintenance industrial pumping and filtration combined in one self-cleaning unit, pump and screen are kept blockage free,
We know you'll have plenty of questions about how things work, what kind of questions to ask us and what we'll ask you. We also have downloadable information across the range of our products as well as a specific information on Filtration Knowledge.
