Rotorflush Sapphire 400AR filterpumps are general purpose high pressure submersible pumps with a built in self-cleaning suction intake screen. The Sapphire range of filterpumps uses Rotorflush's unique self-cleaning intake filter technology while pumping at up to 200 bar.
Their 400mm diameter stainless steel self-cleaning intake screen can be manufactured from 304 or 316 stainless steel. The powerful three phase motors have a thermal cut-out and the intake screens are available in a range of mesh sizes.
These filter pumps offer fine (from 300 microns) to coarse (3mm) filtration. They can pump up to 1000 litres a minute and provide the same low maintenance and efficient intake screening of all our submersible filterpumps.
Pump and filter in one unit, screening from 315 microns to 3 mm
Very low maintenance filtration
60 cubic metres per hour maximum flow
EA Eel Regulation compliant up to 32 m3 / hour (fitted with 2 mm mesh)
20 m maximum operating depth
Reduced capital, installation and maintenance
Sapphire Range 400AR Filterpumps
Models & Specification
Sapphire Range 400AR Filterpumps – high pressure pumps up to 1000 litres minute
Rotorflush Sapphire 400AR filterpumps are a range of medium to high pressure submersible pumps with 400 mm diameter integral self-cleaning suction intake screens. These tough submersible pumps are all cast iron with a 304 stainless steel outer casing and a 400 mm 304 stainless steel self-cleaning intake. They deliver up to 1000 litres a minute of filtered water which is screened as you pump.
They are ideal for use in water contaminated with debris and particulate. Sapphire Range 400AR filterpumps have self-cleaning intakes to keep debris off the filter screen and prevent it entering the pump. They can be fitted with a range of mesh sizes:
100 or 315 micron stainless steel sintered filter mesh
1 mm or 2 mm woven stainless steel mesh
All our filter mesh is 316 stainless steel. Sapphire 400AR filterpumps are suitable for general purpose use where there is a need for medium to high pressure
Sapphire 400 filterpumps ready for dispatch
Performance and Power – Sapphire Range 400AR Filterpumps
Sapphire Model
Volts
Hz*
Output kW
Rated Current Amps
Outlet mm
Motor Protection
Max m3 / hr
Max Head (metres)
Manual or Auto
Phase
SXN10/2-2.2-400
400
50
2.2
5.4
50
Built-in
28
38
Manual
3 phase
SXN25/1-2.2-400
400
50
2.2
5.4
65
Built-in
37
23
Manual
3 phase
SXN10/3-3-400
400
50
3.0
7.2
50
Built-in
28
51
Manual
3 phase
SXN25/2-3-400
400
50
3.0
7.2
65
Built-in
37
33
Manual
3 phase
SXN12.5/3-4-400
400
50
4.0
8.8
50
Built-in
30
57
Manual
3 phase
SXN25/2-4-400
400
50
4.0
8.8
65
Built-in
40
43
Manual
3 phase
SXN15/3-5.5-400
400
50
5.5
11.7
50
Built-in
32
67
Manual
3 phase
SXN25/3-5.5-400
400
50
5.5
11.7
65
Built-in
40
64
Manual
3 phase
SXN25/4-7.5-400
400
50
7.5
15.7
65
Built-in
42
84
Manual
3 phase
SXN25/5-9.2-400
400
50
9.2
19.1
65
–
44
104
Manual
3 phase
SXN20/3-11-400
400
50
11.0
22
65
–
50
106
Manual
3 phase
SXN20/4-15-400
400
50
15.0
31
65
–
50
142
Manual
3 phase
SXN20/5-18.5-400
400
50
18.5
37.2
65
–
50
178
Manual
3 phase
SXN20/6-22-400
400
50
22.0
45
65
–
50
204
Manual
3 phase
*60 Hz versions may be available – please ask.
Please note as standard these filterpumps are fitted with 15 m cable.
Sapphire Range 400AR submersible pumps have three phase motors and are fitted with self-cleaning suction intake screens.
NB: It is very important that three phase motor filterpumps are connected to their power source correctly, to ensure that the pump motor runs in the right direction. When pumps run backwards they are inefficient and the motor may be damaged. To see how to test that the pump is wired correctly watch this video.
Please note that we strongly recommend the use of Control Panels and / or a Din Rail mounted Cos Phi Load Monitor with all 3 phase models to prevent damage to pumps.
Installing adequate load monitoring is a condition of our guarantee for these products.
Rotorflush filterpumps work best with good clearance all around the self-cleaning intake filter.
We can fit stands to suit.
Please Note: Our filters are designed for use in dirty water or liquids with a viscosity close to that of water. Our filters and filterpumps are NOT suitable for use in raw sewage or any other dirty water which contains oils or fat.
Ordering
Sapphire Range 400AR Submersible Pumps from 450 to 1000 litres / min
Submersible pumps with integral self-cleaning suction intake filters (three phase 415v 50Hz)
Sapphire Model
Prices
Sapphire Model
Prices
SXN10/2-2.2-400
£8,475.00
SXN25/3-5.5-400
£9,125.00
SXN25/1-2.2-400
£8,475.00
SXN25/4-7.5-400
£10,160.00
SXN10/3-3-400
£8,510.00
SXN25/5-9.2-400
£11,425.00
SXN25/2-3-400
£8,480.00
SXN20/3-11-400
POA
SXN12.5/3-4-400
£8,630.00
SXN20/4-15-400
POA
SXN25/2-4-400
£8,630.00
SXN20/5-18.5-400
POA
SXN15/3-5.5-400
£9,120.00
SXN20/6-22-400
POA
All prices are exc. of VAT and Carriage
Please note:
All our products are manufactured to order
Delivery is by carrier. Contact us for latest lead times.
Carriage and packing charges are extra.
Contact us – use this form or call 0044 (0)1297 560229
Downloads
Below is the technical and maintenance information for the Sapphire Range 400AR Filterpumps
Our RUBI Range submersible filter pumps offer fine and coarse filtration while pumping up to 600 and 1000 litres per minute. Industrial pumping and filtration combined.
Our Cobalt Range 400AR submersible filter pumps offer fine and coarse filtration while pumping up to 1000 litres per minute. Low maintenance industrial pumping and filtration combined in one self-cleaning unit, pump and screen are kept blockage free,
Our Sapphire Range 600AR submersible filter pumps offer fine and coarse filtration while pumping up to 1500 litres per minute. Low maintenance industrial pumping and filtration combined in one self-cleaning unit, pump and screen are kept blockage free,
We know you'll have plenty of questions about how things work, what kind of questions to ask us and what we'll ask you. We also have downloadable information across the range of our products as well as a specific information on Filtration Knowledge.