RUBI filterpumps are extremely tough filterpumps, suitable for heavy industrial applications. They will pump and screen up to 2000 litres a minute, 528 US GPM, and have a maximum head of 10.2 bar, 145 psi.
RUBI
Jasper filterpumps with self-cleaning intake screens are low and medium head submersible pumps with a maximum output of 1000 l/min and a maximum head of 35 metres. Corrosion resistant 316 stainless steel versions are also available.
Price from: £8,090
Cobalt filterpumps are industrial low to medium pressure submersible pumps with integral self-cleaning suction intake screens. These robust filterpumps offer high volume pumping and screening - up to 75 m3 / hr, 330 US GPM.
Price from: £8,470
Rotorflush Topaz filterpumps are medium head general purpose submersible pumps with integral self-cleaning suction intakes. They combine pumping and screening, delivering up to 60 m3/hr, 265 US GPM - and to a maximum head of 3.3 bar, 47 psi.
Price from: £8,235
Our RUBI filterpumps are based on the successful Tsurumi LH and SFQ ranges of pumps. RUBI LH filterpumps have a hard ductile iron casing and a cast iron motor frame; the self-cleaning intake is all stainless steel. RUBI SFQ filterpumps are all stainless steel construction, wetted parts are all 316 stainless steel.
These filterpumps provide medium to high head flow rates from up to 2 m3 / minute, 530 US GPM. The powerful three phase motors have thermal overload protection and the intake screens are available in a range of mesh sizes.
Typical uses for Rubi filterpumps are:
The Rotorflush RUBI Range of submersible filter pumps have integral self-cleaning intake screens, offer fine or coarse filtration, and provide the same low maintenance and efficiency shared by all Rotorflush products.
RUBI Filterpumps can screen from 60 microns to 6 mm
Robust screen material that can be easily cleaned with a pressure washer. Ideal for heat pumps and other applications where small tolerances require finer screening.
Available 50, 100 and 315 micron apertures; 315 micron only for 600 mm diameter RUBI filterpumps
A tough screen providing for low maintenance; filterpumps with coarse mesh come fitted with rubber backwash jets which are suitable for handling larger particulate and debris.
Available in 1 mm, 2 mm and 3 mm. 2 mm aperture mesh recommended for Fish and Eel protection
Ultra-tough, low-maintenance perforated stainless steel screens. Filterpumps with perforated mesh come fitted with rubber backwash jets, which are suitable for handling larger particulate and debris.
Perforated steel in 3 mm, 6 mm and 10 mm apertures.
These filterpumps are ideal for screening and pumping quarry run-off, industrial process water, raw water, sea water and general heavy industrial uses.
The filter pumps have a weight range from 42kg - 344 kg, lifting gear is required to move them. These filterpumps can be suspended in tanks, sumps or ponds or from buoys, or raised and lowered on a guide-rail system.
For best performance, make sure that there is good clearance around the filterpump mesh so that back-washed debris can disperse, and that the filterpump is above any silt or sludge that may accumulate.
There is no such thing as an entirely maintenance free filter, but RUBI filterpumps, in keeping with all Rotorflush filtration products, are designed for low maintenance hassle-free use.
The stainless mesh can be cleaned with a pressure washer. There is a trade-off between mesh size and maintenance - how often depends on your mesh size and the quality of what you are filtering.
As a minimum we recommend the following:
As a condition of our guarantee, and to protect against dry-running, we recommend the use of a starter panel or control panel capable of cos phi load monitoring when running these filterpumps.
Full maintenance guidelines can be found in the instruction manual available from the download link above.
All our products are built to order and can be made to customer specifications.
Our products and expertise have been appreciated by satisfied customers for over 2 decades.
Through our worldwide distribution network, we offer the ability to:
Call us now on 01297 560 229 | 8am - 5pm UK time
Or leave us a message and a member of our expert, friendly team will call you back and will find the filter pump for your needs.
Tell us which RUBI filterpumps you'd like to know more about, or tell us your choice of RUBI...
This website uses cookies to ensure you get the best experience. Learn more