RF100 Self Cleaning Pump Inlet Filter

From £189.00

The RF100 is the smallest of our award winning self-cleaning inlet filters. It filters up to 30 litres / minute and is designed to protect dry mounted pumps and other equipment.

This robust and reliable filter is easily installed. With compact, lightweight design and simple connections it can be  used for many garden and light industrial applications where there is a need to filter water. Ideal as a pond pump filter and for protecting small water features.

The filter uses 20 - 25% of the pump's output drive the internal backwashing rotor, cleaning the whole screen every ½ second. Debris, wildlife and suspended solids are kept clear of the filter mesh, protecting your pump and other downstream equipment.

Save Page as PDF
RF100 single Self Cleaning Pump Inlet filter

Key Features

  • Protects pumps, analyser cells, jets, solenoid valves etc from blockage
  • Self-cleaning, so maintenance is minimal
  • Low space requirement
  • Robust construction
  • Reliable and economical
  • Fine filtration to 60 microns
  • Protects newts and tadpoles from becoming trapped or injured

RF100 Self Cleaning Pump Inlet Filter


Description

Rotorflush RF100 Self Cleaning Pump Inlet Filter – Technical Specifications

The RF100 Self Cleaning Pump Inlet is the smallest of Rotorflush’s award winning filters. It has a maximum usable flow (depending on conditions) of 30 litres / minute. The RF100 self-cleaning inlet filter is an ideal pond pump. It is designed to protect small surface mounted pumps and other equipment.

Ideal for:

  • Protecting newts and tadpoles as a pond pump filter
  • Protecting equipment from weed and debris
  • Filtration of samples to online analysers
  • Small irrigation systems
  • Rainwater harvesting systems
  • Small pond pumps, fountains and water features
  • Anywhere a flow of filtered fluid is required.

 RF100 single Self Cleaning Pump Inlet filters - up to 30 litres per minute.

Happy tadpoles not getting sucked into a pond pump


How to set up the RF100 single Self Cleaning Pump Inlet filterThe filter uses a proportion of the pump’s output to supply a feed to the internal backwashing rotor. The twin jets of the cleaning rotor rotate at about 60 rpm, cleaning the whole screen every ½ second. Approximately 20 – 25% of the pump output is required to supply the cleaning rotor.

For a larger capacity (up to 60 litres per minute) these filters can be combined to form a double headed duplex version that uses the same technology and filter cages, giving twice the flow rate.

As the cleaning mechanism is on the filtered side of the screen debris in the water will not obstruct the mechanism

 


 

Models & Specification

RF100 single Self Cleaning Pump Inlet filter showing threaded connections

General CharacteristicsRF100 Single Self Cleaning Pump Inlet
Water supply to cleaning rotorTapped from pump outlet
Maximum output (m3 /hour)1.8
Standard screen mesh aperture (mm)60, 115, 250 micron nylon mesh in polypropylene cage
Dimensions (diameter / width x height) mm (excl suctions / return couplings)125 x 67
Weight (kg)0.4

 

 


 

RF100 Dimensions

RF100 single Self Cleaning Pump Inlet filter dimensions 1
RF100 single Self Cleaning Pump Inlet filter dimensions 2
RF100 single Self Cleaning Pump Inlet filter dimensions 3


 

RF100 Self Cleaning Pump Inlet Construction

RF100 single Self Cleaning Pump Inlet filter

ComponentMaterial
Filter cage and lidPolypropylene
JetsAcetal copolymer
BodyAcetal copolymer
Standard filter mesh screen60, 115 or 250 Micron Nylon Mesh


Ordering

Rotorflush RF100 Self Cleaning Pump Inlet – up to 30 litres per minute: £189.00 GBP exc of VAT and carriage

Please state filter mesh size: 60, 115 or 250 micron bias cut nylon mesh is available

Standard fitings are ¾ inch BSP outlet, and ½ inch BSP inlet  to the backwash.

If NPT connections are required please state when ordering


 

Please note:

Delivery is by carrier and is usually between 3 and 7 days from order depending on product and availability.

Carriage and packing charges are extra.

Can’t find what you need?  Want to talk with us directly?

We’re here to helpCall us on +44(0) 1297 560229


All fields marked with * are required


Downloads

Below is the technical and maintenance information for the RF100 Self Cleaning Pump Inlet Filter

...Frequently Asked Questions

We know you'll have plenty of questions about how things work, what kind of questions to ask us and what we'll ask you. We also have downloadable information across the range of our products as well as a specific information on Filtration Knowledge.

Read the FAQs