RF100 Self-cleaning Filters

RF100 filters are general purpose pump suction hose filters with a built-in self-cleaning mechanism that backwashes the filter mesh as your pump draws water. Dirty water is screened at source, helping to prevent the intake, pump and any connected equipment from blocking.

These smaller capacity self-cleaning intakes are ideal for domestic and light industrial applications.

Here are some typical uses of these filters:

• Sampling water for analysis and monitoring
• Protecting nano-bubble equipment
• Filtration for garden ponds and small water features
• Screening light industrial process water

Rotorflush RF100 self-cleaning suction intakes can be fitted with:

For best performance from your RF100 filter, make sure the connections to and from your pump are secure. See that there is good clearance around the filter mesh so that back-washed debris can disperse, and that the filter is above any silt or sludge that may accumulate.

The smallest weigh in at less than a kilogram, the largest at about 1 kilogram, so the filter can be suspended in tanks, sumps or ponds by your pipework alone. 

Rotorflush Filters Ltd are happy to advise and comment on siting and installation.

Although they are self-cleaning, all of our products will require some maintenance every once in a while.

The nylon mesh filter cages can be gently washed with water and detergent, but should also be regularly replaced as the nylon mesh will deteriorate over time. Changing the filter head is very easy thanks to a quick release system.

How often will depend on your mesh size and what you are filtering.  As a minimum we recommend the following:

• Mesh up to 115 microns should be cleaned or replaced after every 1000 hours of use
• Mesh up to 250 microns should be cleaned or replaced after every 5000 hours of use

Full maintenance guidelines can be found in the instruction manual available from the download link above.

All our products are guaranteed for a year.  Full details in our Terms and Conditions.