Omnia Range Submersible Pumps

From 1,890.00 (GBP)

Our Omnia Range submersible pumps are low head filter pumps with integral self-cleaning intake filters. They have a maximum output of 220 litres/minute and pressure of 1.1 bar. These pumps that can be fitted with 60, 115 or 300 micron aperture mesh on the self-cleaning intake.

Their ease of use, low maintenance and combination of hassle-free intake filtration and pumping makes them ideal for dirty water use. They are all single phase and the O2008-16 model has an 110v motor option.

Omnia pumps are used extensively as sample pumps for water quality monitoring and are ideal for open loop heat pump systems.

Download Page as PDF

Key Features

  • Removes suspended solids down to 60 microns
  • Pump and self-cleaning filter in one unit
  • High reliability and easy to install and use
  • 11 metre maximum head
  • 220 litres per minute maximum flow
  • EA Eel Regulation compliant up to 192 litres / minute (fitted with 2 mm mesh)
  • Reduced capital, installation and maintenance costs
  • All Stainless Steel including impellers

Omnia Range Submersible Pumps


Models & Specification

Omnia Range Submersible Pumps with Built-in Self-cleaning Intake ScreensRotorflush self-cleaning filter nylon inserts mixed

The Omnia Range submersible pumps with self cleaning intake can be fitted with 1 mm and 2 mm woven steel mesh, or 60, 115 or 300 micron aperture nylon self-cleaning filter screens as standard.

The filter mesh is made up of strong bias-cut nylon mesh inserts for ease of maintenance.

The inserts are inexpensive and easy to replace.

50, 100 and 315 micron sintered 316 stainless steel mesh options are also available.

Omnia Range submersible filterpump with integral self-cleaning intake screen

Model Volts kW Outlet L/min
Max
Head (metres) Max Optional
Float Switch

O1608-16

230

0.4

1 1/4″

150

7

Yes

O25010-16*

230

0.55

1 1/4″

225

10

Yes

O35012-16

230

0.8

1 1/4″

225

11

Yes

O35012-16**

415

0.8

1 1/4″

225

11

No

O2008-16

110

0.55

1 1/4″

200

8

Yes

* These models are available with US specification 115v 60Hz motors

** Three phase version MUST be used with a Nastec Starter Panel for load protection

 


Omnia Range Submersible Pumps – Performance Curves

Omnia Range submersible pumps with self cleaning inlet filter performance curves (230v 50Hz)
Self-cleaning sample pump for analysers


Omnia Range Dimensions

Model No.
Dimensions (mm) O1608-16 O25010-16 O35012-16 O2008-16
Height 453 491 491 491
Filter Diameter 220 220 220 220
Weight (Kg) 9.5 10 11.5 10

 


 

Omnia Self-Cleaning Intake Filter Construction

Filter screen area 525 cm2
Screen sizes standard 1mm and 2mm woven stainless steel mesh and 60, 115 and 300 micron nylon mesh
Screen material Standard is nylon mesh in polypropylene insert or 1mm and 2mm woven stainless steel mesh.

Sintered stainless steel is also available

Impeller extension shaft Acetal
Impeller 304 stainless steel
Rotor Acetal
Rotor Bearings Silicon Carbide / Acetal
Filter cage AISI 304

 Omnia Range submersible pumps with integral self-cleaning suction intake filter fitted with nylon filter mesh


Please Note: Our filters are designed for use in dirty water or liquids with a viscosity close to that of water. Our filters and filterpumps are NOT suitable for use in raw sewage or any other dirty water which contains oils or fat.



Ordering

Omnia Range Submersible pumps with integral self-cleaning intake filters, from 150 to 220 litres / min
Standard mesh sizes – 60, 115 and 300 micron nylon, 1mm and 2mm 316 stainless steel mesh*

 

Model No.

Single phase

Single phase + float switch

Single phase 115v 60Hz + float switch

O25010-16MA 115v 60Hz

£2,390.00

O1608-16

£1,890.00 £1,925.00

O25010-16

£2,090.00 £2,135.00

02008-16 110v

£2,135.00 £2,190.00

O35012-16

£2,280.00 £2,340.00 Three Phase Version same price as Single Phase version

* 50, 100 and 315 micron sintered stainless steel mesh screens are plus £155.00p (GBP) per filter-pump exc. VAT and Carriage

 

Please note:

All our products are manufactured to order

Delivery is by carrier.  Contact us for latest lead times.

Carriage and packing charges are extra.


Can’t find what you need?  Want to talk with us directly?

We’re here to helpCall us on +44(0) 1297 560229



    All fields marked with * are required


    Downloads

    Below is the technical and maintenance information for the Omnia Range Submersible Pumps

    ...Frequently Asked Questions

    We know you'll have plenty of questions about how things work, what kind of questions to ask us and what we'll ask you. We also have downloadable information across the range of our products as well as a specific information on Filtration Knowledge.

    Read the FAQs