Products
Expertise by Industry
Case Studies
Knowledge
Nauti Filterpumps™
Rotorflush Nauti Filterpumps™. High-head submersible filter pumps with built-in self-cleaning filters on the suction intake. They have a maximum output of 220 litres a minute, and can pump up to 10 bar. Pumping and filtration are combined. All stainless steel construction.
Key Features
Nauti Filterpumps™
Specifications & Dimensions
Specification
Dimensions
Prices & ordering
- All Models
- N93
- N94
- N95
- N96
- N97
- N98
- N99
General Information About Nauti Filterpumps™
Nauti submersible filter pumps are high pressure centrifugal submersible pumps with a built-in self-cleaning filter in their intake. They can screen dirty water as they pump - the self-cleaning intake protects against blocking.
Nauti Filterpumps™ are high head, multistage pumps, ideal for industrial applications requiring up to 220 litres a minute.
Here are some typical uses of Nauti Filterpumps™:
- Wash water for trash screens
- Dirty water systems on dairy farms
- Irrigation
- Screening process water for re-use
Nauti Filterpumps™ can be fitted with:
Nylon Mesh inserts
The filter mesh is made up of replaceable bias-cut nylon mesh offering a very clean filtration, ideal for sampling. The inserts are inexpensive and easy to replace.
Available in 60 micron, 115 micron or 300 micron.
316 stainless Sintered Mesh
A robust screen that can be easily cleaned with a pressure washer. Ideal for heat pumps and other application with small tolerances.
Available in 50 micron, 100 micron and 315 micron.
Nauti Filterpumps™ are ideal for screening and pumping raw water for irrigation and industry, final effluent for sewage treatment works wash and for screening industrial process water. For best performance, make sure that there is good clearance around the filter pump mesh so that back-washed debris can disperse, and that the filter pump is above any silt or sludge that may accumulate.
The smallest Nautis weigh in at 20 kgs, the largest at 28 kgs. Nauti filterpumps™ can be suspended in tanks, sumps or ponds. They can be suspended from floats or buoys, or raised and lowered on a guide-rail system.
Rotorflush Filters Ltd are happy to advise and comment on siting and installation.
Although they are self-cleaning all of our products will require a manual clean every once in a while.
The nylon mesh inserts are easily replaced and stainless mesh can be cleaned with a pressure washer.
How often will depend on your mesh size and what you are filtering.
As a minimum we recommend the following:
- Mesh up to 115 micron should be cleaned or replaced every 1000 hours of use
- Mesh up to 315 micron should be cleaned or replaced every 5000 hours of use
Full maintenance guidelines can be found in the instruction manual available from the download link above.
All our products are guaranteed for a year. However, as a condition of our guarantee, and to protect against dry-running, we recommend the use of a starter panel or control panel capable of cos phi load monitoring when running three-phase filter pumps.
Full details in our Terms and Conditions.
What is the difference between a Rotorflush Filterpump™ and a filter pump?
A filter pump is a pump with a filter on the intake; a Rotorflush Filterpump™ is our unique, award-winning submersible pump with a built-in self-cleaning filter on the pump intake that keeps the intake filter clear and protects the pump from blocking and clogging.
Why Rotorflush?
Designed & Manufactured in the UK
All our products are built to order and can be made to customer specifications.
- Built to suit your requirements
- Pump and Filter down to 50 microns
- Hand built in the UK
Experts in Water Screening and Filtration
Our products and expertise have been appreciated by satisfied customers for over 2 decades.
- Industry experts for over 20 years
- 1000's of products in use worldwide
- Successfully screening 10 - 7,225 US GPM / 2 - 1,640 m3 hr
- Our products keep water flowing by protecting pumps, screens, spray bars…….
- .…nozzles, heat exchangers and other connected equipment from blocking
Worldwide Delivery and Service
Through our worldwide distribution network, we offer the ability to:
- Deliver filter pumps worldwide
- Help service your filter pump
- Repair a broken filter pump (whatever you've done to it…)
Speak to One Our Knowledgeable Staff
Call us now on 01297 560 229 | 8am - 5pm GMT,
or Email sales@rotorflush.com and a member of our expert, friendly team will call you back and will find the filter pump for your needs.
- We work with you to identify your issues
- We can design & build a custom solution
- We can deliver our solution worldwide
We'll help you find the right Nauti for you...
or tell us which Nauti Filterpump™ you'd like to know more about....
This website uses cookies to ensure you get the best experience. Learn more