RF200A Self-cleaning Pump Intake filter

The RF200A self-cleaning filters are intake screens for attachment to the suction hose of surface mounted pumps. The RF-A Series can be fitted with tough nylon filter mesh, sintered stainless steel mesh or woven stainless steel mesh and can filter from 60 microns - 2 mm. The RF200A filters have a capacity of up to 220 litres per minute.

All our filters have an internal cleaning rotor that is water powered by taking a 'T' off the output of your pump to supply the Rotorflush internal rotors. This supply continuously backwashes the mesh screen pushing away anything that might cause it to block.

These filters can operate in very dirty water without blocking, reducing the need for settlement tanks and keeping maintenance to a minimum.

The Rotorflush RF200R is a coarse screened self-cleaning strainer that connects to the suction hose of surface mounted pumps. The RF200R is fitted with a single sheet of perforated stainless steel mesh which forms the filter cage. Standard perforated mesh sizes are 3mm and 6mm. The RF200R filters have a capacity of up to 220 litres per minute.

All our filters have an internal cleaning rotor that is water powered by taking a 'T' off the output of your pump to supply the Rotorflush internal rotors. This water supply continuously backwashes the perforated screen pushing away anything that might cause it to block or blind.

These filters can operate in very dirty water and are ideal for use where there is a need to filter coarsely to protect pumps and other downstream equipment.

RF200A-E & RF200R-E Automatic Backwash Filter

The RF200A-E and RF200R-E are self-cleaning intake filters for attachment to the suction hose of surface mounted pumps.  These filters are the same as the RF200A filters and RF200R strainers with one difference. Unlike the RF200A and RF200R filters the backwash is not powered by the pump they are attached to - they have their own integral backwash pump to keep the filter mesh clear.

This allows you to vary the output of your pump without affecting the performance of the backwash in the filter – useful if you have a variable speed drive on your pump.  These filters and strainers will deliver up to 220 litres / minute of filtered output.

The RF200A-E can be fitted with tough nylon filter mesh or sintered stainless steel mesh and can filter from 60 - 315 microns. The RF200R-E filters can be fitted with 1mm, 2mm, 3mm or 6mm mesh.

The RF300 self-cleaning filters and strainers attach to the suction intake of surface mounted pumps. The self-cleaning filter uses a continuous backwash to clean as water is pumped, preventing the intake screen from blocking.

The R300 is a tough stainless steel intake filter that protects pumps and other connected equipment form blocking and blinding.

It can be fitted with tough nylon or stainless steel filter mesh and can filter from 50 microns to 3 mm. The RF300AR can handle up to 560 litres per minute.

The filter self-cleans whenever your pump is in operation and provides a very efficient, low maintenance solution to pumping water contaminated with suspended solids.

RF400 self-cleaning filters nylon and steel mesh strainers and filters

The RF400 self-cleaning filters and strainers are for use on the suction side of surface mounted pumps. The RF400 is an extremely tough stainless steel basket filter that protects pumps and other connected equipment form blocking and blinding.

It can be fitted with tough nylon filter mesh or stainless steel screens and can filter from 60 microns to 6mm. The RF400AR can handle up to 1000 litres per minute.

The patented self-cleaning mechanism in the filter provides a continuous backwash keeping the filter mesh free of weed and debris.

The filter self-cleans whenever your pump is in operation and provides a very efficient low maintenance solution to pumping water contaminated with suspended solids.

The RF300AR-E strainer with backwash pump allows you to pump and screen dirty awater even with a variable speed drive

The RF300AR-E strainer with backwash pump is a self-cleaning suction intake filter, attaching to the suction hose of surface mounted pumps.   They are the same as the RF300AR strainers, but with one difference.

They have a separate motor to drive their internal self-cleaning backwash, so that the cleaning mechanism is driven independently of your surface mounted pump - they have their own integral backwash pump.

This allows you to vary the output of your pump without affecting the performance of the backwash in the filter – useful if you have a variable speed drive on your pump and wish to keep the intake clear.

RF400AR-E Self-cleaning Strainer with Backwash Pump

The RF400AR-E Stainers with backwash pump are self-cleaning intake filters for attachment to the suction hose of surface mounted pumps.  These filters can be fitted with nylon or stainless steel mesh and are the same as the RF400AR strainers but with one difference.

The filters have a separate motor to drive their internal self-cleaning backwash, so that the cleaning mechanism is driven independently of the surface mounted pump - they have their own integral backwash pump to keep the filter mesh clear.

This allows you to vary the output of your pump without affecting the performance of the backwash in the filter – useful if you have a variable speed drive on your pump.

These filters and strainers will deliver up to 1000 litres / minute of filtered output from 50 microns to 6mm.