Submersible Pumps
Submersible pumps are designed to operate underwater, pumping water from one location to another. They are commonly installed in wells, boreholes, tanks, rivers, ponds, reservoirs and industrial water systems.
Unlike surface-mounted pumps, which draw water through a suction pipe, submersible pumps are installed directly in the water source. The pump and motor are housed together in a sealed unit, allowing water to be pumped through a discharge pipe to where it is needed.
Submersible pumps are available in different sizes and designs, depending on the water quality, flow rate and pumping requirements.
Submersible pumps are used across a wide range of industries and applications, including:
However, when pumping water containing leaves, weeds, algae and other debris, a conventional submersible pump can become blocked at its intake. This can interrupt service, reduce performance and lead to frequent maintenance.
Submersible pumps with self-cleaning intakes are designed for applications where conventional submersible pumps are likely to become blocked by debris in the water.
Rotorflush manufactures specialist submersible pumps with built-in self-cleaning suction intake filters, known as Filterpumps™.
Unlike a standard submersible pump, which generally has an open or guarded intake, Rotorflush Filterpumps have a screened intake that filters water as it enters the pump. Simply fitting a conventional pump with a fine mesh screen is not usually enough, as this can quickly become blocked when pumping dirty water.
Rotorflush Filterpumps overcome this problem with a continuous, automatic backwashing mechanism. An additional impeller on the pump motor shaft drives the filter mechanism. This propels the cleaning jets to keep the filter mesh clear from debris, allowing the pump to continue supplying filtered water without interrupting the flow.
This helps reduce blockages, minimise maintenance and protect other equipment.
A Rotorflush Filterpump combines pumping and filtration in one unit, providing screened water directly from the source. This is particularly useful where dirty or contaminated water would otherwise cause conventional pumps or separate intake screens to block frequently.
By filtering water as it enters the pump, Filterpumps can also help protect downstream equipment, including irrigation nozzles, spray bars and heat exchangers.
The self-cleaning mechanism reduces the need for frequent manual cleaning and helps maintain a reliable water supply in challenging conditions.
Get in touch with our friendly team to find out more about how Rotorflush Filterpumps™ can benefit you.