Self-cleaning filter pump. The O1608-16 sample pump is a low head submersible filter pump with an integral self-cleaning filter for use with on-line analysers and dosing systems. It delivers a filtered output of water which prevents blockage to nozzles, valves and solenoids. Sample water can be screened to 60 microns and pumped simultaneously.
Filterpumps™ for Sampling
Our smaller filter pumps, Omnia, Flint and Idrogo Filterpumps™, are used widely in the water industry and beyond for raw and dirty water sampling for analysis. These are submersible centrifugal pumps with integral self-cleaning suction intakes that can screen and pump water simultaneously.
These pumps are preferred for raising sample water because they can screen down to 60 microns without blocking. Because water is filtered as it is pumped from source, analytical equipment is protected against clogging and blocking by any debris or particulate that may be in the sample water.
Here are some of the uses we have our sample pumps for:
Rotorflush Omnia sample filter pump fitted with sintered stainless steel intake screen, built in float switch and small stand.
Sample filter pumps can be fitted with:
The filter mesh is made up of replaceable bias-cut nylon mesh offering a very clean filtration, ideal for sampling. The inserts are inexpensive and easy to replace.
Available in 60 micron, 115 micron or 300 micron.
A robust screen that can be easily cleaned with a pressure washer. Ideal for heat pumps and other application with small tolerances.
Available in 50 micron, 100 micron and 315 micron.
Due to their small size and portability, our sample pumps are very versatile and can be installed in a number of ways.
The key thing to remember is to make sure that they have a lot of clear space around the mesh for the back-washed debris to be dispersed into, and that they are not sitting in a build-up of silt or sludge.
Sample pumps can be suspended in water, hung from a float, or if the water conditions allow, placed in water on a stand.
We also manufacture stands and guide rails to help site your filter pump.
Rotorflush submersible self-cleaning intake sample pump on a guide rail
Although they are self-cleaning all of our products will require a manual clean every once in a while.
The nylon mesh inserts are easily replaced and stainless mesh can be cleaned with a pressure washer. How often depends on your mesh size and what you are filtering.
As a minimum we recommend the following:
Full maintenance guidelines can be found in the instruction manuals available from the download link above.
All our products are guaranteed for a year. Full details in our Terms and Conditions below.
Talk to our friendly team of engineers to discuss your design requirements.
Talk to our friendly team of engineers to discuss your design requirements.
Through our worldwide distribution network we offer the ability to:
or Email sales@rotorflush.com and a member of our expert, friendly team will call you back and will find the filter pump for your needs.
Get the filter pump your project requires, talk to our friendly team
This website uses cookies to ensure you get the best experience. Learn more