Jade filterpumps are 60 Hz medium – high head, multistage submersible pumps in chrome-nickel stainless steel with a stainless steel integral self-cleaning suction intake. They have a maximum output of 92 US GPM, maximum head of 160 ft.
Jade
Jade submersible filterpumps are general use centrifugal pumps with a built-in self-cleaning intake. They are robust medium-head pumps that screen dirty water as they pump - the self-cleaning intake protects against blocking.
They both offer a maximum of 92 US GPM, the smaller JMXS1001 model has a maximum head of 82 ft, the larger JMXS1002 160 ft.
Jade filterpumps are made of cast iron and stainless steel, for durability. Typical uses for Jade filterpumps are:
The filter mesh is made up of replaceable bias-cut nylon mesh offering a very clean filtration, ideal for sampling. The inserts are inexpensive and easy to replace.
Available with 230, 120 or 50 US Mesh screens (60, 115, or 300 microns).
Robust screen material that can be easily cleaned with a pressure washer. Ideal for heat pumps and other applications where small tolerances require finer screening.
Available with 270, 140 and 50 US Mesh screens (50, 100 or 315 microns).
A tough coarse screen providing for low maintenance; filterpumps with coarse mesh come fitted with rubber backwash jets which are suitable for handling larger particulate and debris.
Available with 35, 18, 10 and 3 US Mesh screens (1 mm, 2 mm and 3 mm).
These filterpumps are ideal for screening and pumping raw water for open loop heat pump systems, irrigation, pumping from septic tanks, rain and storm water management and more.
The smallest Jades weigh in at 75 lbs, the largest at 88 lbs. Jade filterpumps can be suspended in tanks, sumps or ponds. They can be attached to floats or buoys, or raised and lowered on a guide-rail system.
For best performance, make sure that there is good clearance around the filterpump mesh so that back-washed debris can disperse, and that the filterpump is above any silt or sludge that may accumulate.
There is no such thing as an entirely maintenance free filter but Jade filterpumps, in keeping with all Rotorflush filtration products, are designed for low maintenance hassle-free use.
The nylon mesh inserts are easily replaced, and stainless mesh can be cleaned with a pressure washer. There is a trade-off between mesh size and maintenance - how often depends on your mesh size and what you are filtering.
As a minimum we recommend the following:
Full maintenance guidelines can be found in the instruction manual available from the download link above.
All our products are built to order and can be made to customer specifications.
Our products and expertise have been appreciated by satisfied customers for over 2 decades.
Through our worldwide distribution network, we offer the ability to:
Call us now on 01297 560 229 | 8am - 5pm UK time
Or leave us a message and a member of our expert, friendly team will call you back and will find the filter pump for your needs.
…or tell us which Jade filterpump you'd like to know more about....
This website uses cookies to ensure you get the best experience. Learn more