Cobalt filterpumps are industrial low to medium pressure submersible pumps with integral self-cleaning suction intake screens. These robust filterpumps offer high volume pumping and screening - up to 108 m3 / hr, 475 US GPM.
Cobalt 600 Filterpumps
Cobalt filterpumps are industrial low to medium pressure submersible pumps with integral self-cleaning suction intake screens. These robust filterpumps offer high volume pumping and screening - up to 75 m3 / hr, 330 US GPM.
Price from: £8,470
Rotorflush Topaz filterpumps are medium head general purpose submersible pumps with integral self-cleaning suction intakes. They combine pumping and screening, delivering up to 150 m3/hr, - 660 US GPM - and to a maximum head of 4.8 bar, 68 psi.
Price from: £15,630
Cobalt submersible filterpumps are low to medium head industrial use centrifugal pumps. These robust filterpumps benefit from a cast iron upper cover, a strengthened AIS1304SS motor case, chrome steel impeller and a built-in stainless steel self-cleaning intake which protects against blocking.
Cobalt filterpumps combine pumping and screening up to a maximum of 108 m3/hr, the smallest CKC31.5-400 model has a maximum head of 15 m, and the largest CKC45.5-600 model 30 m.
These filterpumps are built for heavy-duty industrial. Typical uses for Cobalt filterpumps are:
Cobalts being washed after wet testing, getting ready to be shipped
Robust screen material that can be easily cleaned with a pressure washer. Ideal for heat pumps and other applications where small tolerances require finer screening.
Available in 315 microns.
A tough coarse screen provides the best maintenance schedules. Filterpumps with coarse mesh come fitted with rubber backwash jets which are suitable for handling larger particulate and debris.
Available in 1 mm, 2 mm and 3 mm.
These filterpumps are ideal for screening and pumping raw water, clean or dirty water irrigation, pumping in harsh environments, and general heavy industrial uses.
The Cobalt filterpumps weigh up to 150 kg, lifting gear is required to move them. These filterpumps can be suspended in tanks, sumps or ponds or from buoys, or raised and lowered on a guide-rail system.
For best performance, make sure that there is good clearance around the filterpump mesh so that back-washed debris can disperse, and that the filterpump is above any silt or sludge that may accumulate.
Rotorflush Filters Ltd is happy to advise and comment on siting and installation.
There is no such thing as an entirely maintenance free filter, but Cobalt filterpumps, in keeping with all Rotorflush filtration products, are designed for low maintenance hassle-free use.
The stainless mesh can be cleaned with a pressure washer. There is a trade-off between mesh size and maintenance - how often depends on your mesh size and what you are filtering.
As a minimum we recommend the following:
Full maintenance guidelines can be found in the instruction manual available from the download link above.
All our products are guaranteed for a year. However, as a condition of our guarantee, and to protect against dry-running, we recommend the use of a starter panel or control panel capable of cos phi load monitoring when running three-phase filterpumps.
Full details in our Terms and Conditions below.
All our products are built to order and can be made to customer specifications.
Our products and expertise have been appreciated by satisfied customers for over 2 decades.
Through our worldwide distribution network, we offer the ability to:
Call us now on 01297 560 229 | 8am - 5pm UK time
Or leave us a message and a member of our expert friendly team will call you back and will find the filter pump for your needs.
We work with you to identify your issues
We can design & build a custom solution
We can deliver our solution worldwide
Tell us which filterpumps you'd like to know more about, or tell us your choice of Cobalt....
This website uses cookies to ensure you get the best experience. Learn more