Submersible Pumps with a Self-cleaning Intake Filter – up to 2,500 litres a minute
Filterpumps with a Self-cleaning Intake for use in very difficult water conditions
We build our larger filterpumps with a Self-cleaning Intake for use in harsh and dirty conditions where basket strainers would normally block. The filter mesh stays clean as a result of the effective self-cleaning filter. They also protect spray bars, irrigation nozzles and other connected equipment.
This means that you can pump and filter dirty water that would normally defeat a conventional centrifugal pump. This is because a continuous backwash keeps the intake screen clear. So these high capacity submersible filterpumps operate without the high maintenance associated with usual intake screening.
One easy to install ‘plug and play’ unit combines pumping and filtering. And now our filterpumps can move even more dirty water.
Submersible pumps with a self-cleaning intake are used:
- throughout the water industry
- on farms for removing dirty water and for irrigation
- to protect heat pump installations
- clean up industrial waste water for disposal
- and for raw water abstraction
- to protect heat pump installations and heat exchangers
Cobalt 400 filterpumps use fine or coarse intake screens. These filterpumps protect the pump and any downstream equipment from blockage, reducing maintenance to a minimum. Consequently maintaining our submersible pumps with self-cleaning intakes is easy, infrequent and inexpensive. Their ease of use and minimal maintenance has led to a growing demand for these products across many industries.
Cobalt general purpose filterpumps offer flow rates up to 1000 litres / minute and up to 23m head.
The all 316 stainless steel pumps care complemented by our highly effective self-cleaning intake screens. These filterpumps are therefore ideal for seawater and estuarine use.
Acidic or alkaline industrial environments will also benefit from their tough corrosion resistant construction.
Jasper stainless steel range of filterpumps offers flow rates up to 1000 litres / minute and up to 60m head.
“A major water company needed to provide a means for spray cleaning its first stage sewage separation screens. Potable water could not be used in such an applications because of the danger of cross supply contamination and excessive cost, so we had to arrange for a suitably filtered continuous supply from the treatment works’ “final effluent” output.
While this is suitable for discharging into the water course, it nevertheless contains enough solid particles to require a normal filtration system to be cleaned at frequent intervals. We therefore specified a Rotorflush Filter-pump which continuously cleans its own filter without the need for manual intervention.
Initially, the customer specified water pressure turned out to be more than necessary for the job, but Rotorflush responded very efficiently by quickly modifying and returning the unit, which has since functioned perfectly with minimal attention.”
RUBI, Jasper 400 and Cobalt 400 Rotorflush submersible filterpumps have a maximum output of 1000 litres per minute.
Lower capacity industrial self-cleaning filter pumps with self-cleaning intake – from 80 to 220 litres per minute
All our pumps and filters can work in fluids containing up to 2000mg / litre total suspended solids, depending on flow rate. They produce a continuous filtered output which prevents downstream blockage to nozzles, valves and solenoids. In other words maintaining them is easy, infrequent and inexpensive.
Their ease of use and minimal maintenance has led to a growing demand for these products across many industries. Smaller filterpumps are ideal for sampling water for analysers, and pumping and filtering raw water ahead of open loop heat pump installations.
Call or email us to find out more 01297 560 229
Need More capacity?
Large capacity industrial self-cleaning filter pumps with self-cleaning intake up to 150 m3 / h
As with all our filterpumps they produce a continuous filtered output which protects the pumps and prevents downstream blockages. Thee same ease of use and minimal maintenance has encouraged their use in more and more industrial;l sectors. Large heavy duty industrial submersible pumps that don’t block in difficult conditions are now in demand from the Oil and Gas sector, water industries, agriculture, food manufacturing and processing, and the power industry.
Call or email us to find out more 01297 560 229
Filter water for:
Landscape irrigation – Waste Water Treatment – Fountains and water features – Laundries – Online analysers – Farm use – De-watering – Vegetable Washing – ………….and much more……….
Rotorflush filters are Eel friendly – our products can help with your compliance with the Environment Agency’s Eel Recovery Plan (Council Regulation No.1100/2007) and The Eel Regulations which now apply in England and Wales.
So call for more information about using Rotorflush filters for eel screening.
Please Note: Our filters are designed for use in dirty water or liquids with a viscosity close to that of water. Our filters and filterpumps are NOT suitable for use in raw sewage or any other dirty water which contains oils or fat.