Submersible Pumps with Self-cleaning Intake – 1000 L/min

Large capacity - up to 1000 litres per minute

Submersible Pumps with Self-cleaning Intake

Rotorflush RUBI LH400 Submersible Pumps with Self-cleaning Intake screens and filtersSubmersible pumps with self-cleaning intake screens built-in to protect the pump and keep the filter clear. Self-cleaning suction intake screens built into the pumps prevent the filter and the pump from blocking. While these pumps are in operation a continuous backwash keeps the intake screen clear. They can pump and filter up to 60 m3 per hour.

These industrial submersible filter pumps allow dirty water to be continuously pumped without the high maintenance associated with usual intake screening. Our larger filterpumps are built for use in harsh and dirty conditions where basket strainers will block. Pumping and filtering are combined in one easy to install ‘plug and play’ unit.

RUBI and Jasper self-cleaning Filterpumps

The RUBI and Jasper ranges of submersible pumps with self cleaning intake can be fitted with fine or coarse intake screens.

The self-cleaning filters on these submersible pumps can be fitted with 115 or 300 micron woven mesh in either tough nylon or sintered stainless steel for finer filtration.

1mm and 2mm woven stainless steel mesh or 3mm and 6mm perforated steel mesh can be fitted for coarser filtration. These filterpumps protect the pump and any downstream equipment from blockage, reducing maintenance to a minimum.

Maintaining our Submersible pumps with self-cleaning intake is easy, infrequent and inexpensive. Their ease of use and minimal maintenance has led to a growing demand for these products across many industries.


“A major water company needed to provide a means for spray cleaning its first stage sewage separation screens. Potable water could not be used in such an applications because of the danger of cross supply contamination and excessive cost, so we had to arrange for a suitably filtered continuous supply from the treatment works’ “final effluent” output. While this is suitable for discharging into the water course, it nevertheless contains enough solid particles to require a normal filtration system to be cleaned at frequent intervals. We therefore specified a Rotorflush Filter-pump which continuously cleans its own filter without the need for manual intervention. Initially, the customer specified water pressure turned out to be more than necessary for the job, but Rotorflush responded very efficiently by quickly modifying and returning the unit, which has since functioned perfectly with minimal attention.”


RUBI and Jasper range Rotorflush submersible pumps with self-cleaning intake filters have a maximum output of 1000 litres per minute.

 


Omnia Filter pump with self-cleaning filter

Need less capacity?

Lower capacity industrial self-cleaning filter pumps with self-cleaning intake – from 80 to 220 litres per minute

All our pumps and filters can work in fluids containing up to 2000mg / litre total suspended solids, depending on flow rate. They produce a continuous filtered output which prevents downstream blockage to nozzles, valves and solenoids. Maintaining them is easy, infrequent and inexpensive. Their ease of use and minimal maintenance has led to a growing demand for these products across many industries.

Even larger Submersible Pumps with Self-cleaning Intake

Need More capacity?

Large capacity industrial self-cleaning filter pumps with self-cleaning intake  up to 120 m3 / h

All our pumps and filters can work in fluids containing up to 2000mg / litre total suspended solids, depending on flow rate. They produce a continuous filtered output which prevents downstream blockage to nozzles, valves and solenoids. Maintaining them is easy, infrequent and inexpensive. Their ease of use and minimal maintenance has led to a growing demand for these products across many industries.


 

Filter water for:

  • Landscape irrigation
  • Waste Water Treatment
  • Fountains and water features
  • Laundries
  • Online analysers
  • Farm use
  • Vegetable Washing
  • ………….and much more……….

Eel Friendly

Rotorflush filters are gently self-cleaning low intake velocity strainers and make ideal eel screens for water abstraction. Our self-cleaning filters are Eel friendly – our products can help with your compliance with the European Commission’s Eel Recovery Plan (Council Regulation No.1100/2007) and The Eel Regulations which now apply in England and Wales. Call for more information about using Rotorflush filters for eel screens.