Our RF200 self-cleaning filters provide effective screening for surface mounted pump intakes. The RF200 series can filter from 50 microns - 6 mm, handling up to 220 litres a minute, 58 US GPM.
RF200 Filter
Our Omnia range low head submersible pumps have a maximum output of 220 litres/minute and a maximum head of 1.1 bar. They have single phase motors and integral self-cleaning suction intakes and are ideal for sampling and small open loop heat pump systems.
Price from: £1,970
The RF100 series self-cleaning inlet filters are designed to protect dry mounted pumps and other equipment from blocking while water is being pumped. Available with 1, 2, or 3 filter heads, capacity up to 90 litres a minute, 24 US GPM.
Price from: £280
The R300 is a suction side self-cleaning stainless steel intake filter that protects pumps and other connected equipment from blocking and blinding. RF300's can can handle up to 560 litres a minute, 148 US GPM.
Price from: £2,600
RF200 filters are general purpose suction intake filters with a built-in self-cleaning mechanism that back-washes the filter mesh as your pump draws water. They are designed for use with a surface mounted pump, which can also supply the backwash to the screen from its output. Alternatively, these screens can be made with a built-in submersible pump to provide a dedicated backwash to the mesh separately from your main pump.
Dirty water is screened at source, helping to prevent the intake, pump and any connected equipment from blocking. These smaller capacity self-cleaning intakes are ideal for domestic and light industrial applications.
Here are some typical uses of these filters:
Standard RF200R self-cleaning suction intake screens fitted with various meshes
RF200R-E self-cleaning suction intake screen with built in backwash pump and perforated steel mesh
Rotorflush RF200 self-cleaning suction intakes can be fitted with:
The filter mesh is made up of replaceable bias-cut nylon mesh offering a very clean filtration, ideal for sampling. The inserts are inexpensive and easy to replace.
Available in 60 micron, 115 micron or 300 micron.
A robust 2 layer sintered steel screen that can be easily cleaned with a pressure washer. Ideal for screening water for heat pumps and other application with small tolerances.
Available in 50 micron, 100 micron and 315 micron.
A coarse screen providing ultra-low maintenance cycles, filters and screens with coarse mesh come fitted with rubber backwash jets which are suitable for handling larger particles. Ideal difficult water conditions.
Mesh apertures available: 1 mm, 2 mm and 3 mm
A coarse screen providing ultra-low maintenance cycles, filters and strainers with coarse mesh come fitted with rubber backwash jets which are suitable for handling larger particles. Perforated mesh strainers are used where water is very dirty and screening needs to remove larger debris and particulate.
Mesh apertures available: 3 mm, 6 mm and 10 mm
Due to their small size (200 mm diameter), RF200s can be installed in a number of ways.
The key thing to remember is to make sure that they have a lot of clear space around the mesh for the backwashed debris to be dispersed into, and that they are not sited in any silt or sludge build up below the filter.
RF200s can be suspended or attached to a float. We also manufacture stands and guide rails to help site our products.
Set-up using filter with separate dry backwash pump.................................Set-up using filter with built-in submersible backwash pump
Although they are self-cleaning all of our products will require a manual clean every once in a while.
The nylon mesh inserts are easily replaced, and stainless mesh can be cleaned with a pressure washer. How often depends on your mesh size and what you are filtering.
As a minimum we recommend the following:
Full maintenance guidelines can be found in the instruction manual available from the download link above.
All our products are guaranteed for a year. Full details in our Terms and Conditions below.
All our products are made to order, and many can be made to customer specifications.
Our products and expertise have been appreciated by satisfied customers for over 2 decades.
Through our worldwide distribution network, we offer the ability to:
Call us now on 01297 560 229 | 8am - 5pm UK time
Or leave us a message and a member of our expert, friendly team will call you back and will find the filter pump for your needs.
or tell us which RF200 filter you'd like to know more about.
This website uses cookies to ensure you get the best experience. Learn more