Manufactured in the UK

Leading Water Filter Experts

Delivered Worldwide

RF100IND-Q Self-cleaning filter
RF100Duplex self-cleaning filter
RF100Triplex self-cleaning filter
A dissasembled RF100triplex self-cleaning filter
A dissassembled RF100IND-Q Self-cleaning filter
A dissasembled RF100Duplex self-cleaning filter
RF100IND-Q Self-cleaning filter
RF100Duplex self-cleaning filter
RF100Triplex self-cleaning filter
A dissasembled RF100triplex self-cleaning filter
A dissassembled RF100IND-Q Self-cleaning filter
A dissasembled RF100Duplex self-cleaning filter

RF100

The RF100 series self-cleaning inlet filters are designed to protect dry mounted pumps and other equipment from blocking while water is being pumped. Available with 1, 2, or 3 filter heads, capacity up to 90 litres a minute, 24 US GPM.

Key Features

  • Compact and Robust Construction
  • Filters Up to 90 L/Min Down to 60 Microns
  • Keeps Pumps, Fountains, Nozzles etc. From Blocking
  • Protects Newts, Tadpoles and Other Pond Life

Configure your product

Your price from:
Enquire Now

RF100

  • Specifications
  • Prices & ordering
  • Downloads
Enquire

Specifications & Dimensions

Select model
To view accurate specification and dimension details

Specification

set up diagram for a RF100 Triplex filter
Flow Rate max
30 L/min
Outlet
0.75" BSP
Backwash Connection
0.5" BSP
Backwash
6 l/min (approx.)
Mesh Apertures Available
60, 115 or 250 micron Nylon
Flow Rate max
60 L/min
Outlet
1.25" BSP
Backwash Connection
0.75" BSP
Width
260 mm
Backwash
12 l/min (approx.)
Mesh Apertures Available
60, 115 or 250 micron Nylon
Flow Rate max
90 L/min
Outlet
1.25" BSP
Backwash Connection
0.75" BSP
Backwash
18 l/min (approx.)
Mesh Apertures Available
60, 115 or 250 micron Nylon

Dimensions

RF100 range Dimensions
Height
122 mm
Diameter
145 mm
Height
240 mm
Diameter
140 mm
Weight
0.4 kg
Height
286 mm
Diameter
245 mm
Weight
0.6 kg

Prices & ordering

  • All Models
  • RF100IND-Q
  • RF100Duplex
  • RF100Triplex
Model No.
RF100IND-Q
RF100Duplex
RF100Triplex

General Information About the RF100 Self-cleaning Filters

RF100 filters are general purpose suction intake filters with a built-in self-cleaning mechanism that backwashes the filter mesh as your pump draws water. Dirty water is screened at source, helping to prevent the intake, pump and any connected equipment form blocking.

These smaller capacity self-cleaning intakes are ideal for domestic and light industrial applications.

Here are some typical uses of these filters:

  • Sampling water for analysis and monitoring
  • Protecting nano-bubble equipment
  • Filtration for garden ponds and small water features
  • Screening light industrial process water
RF100 Range

Rotorflush RF100 self-cleaning suction intakes can be fitted with:

Nylon Mesh inserts

The filter mesh is made up of replaceable bias-cut nylon mesh offering a very clean filtration, ideal for sampling. Spare filter cages are inexpensive and easy to replace.

Available in 60 micron, 115 micron or 250 micron.

For best performance from your RF100 filter, make sure the connections to and from your pump are secure. See that there is good clearance around the filter mesh so that back-washed debris can disperse, and that the filter is above any silt or sludge that may accumulate.

The smallest weigh in at less than a kilogram, the largest at about 1 kilogram, so the filter can be suspended in tanks, sumps or ponds by your pipework alone. 

Rotorflush Filters Ltd are happy to advise and comment on siting and installation.

RF 100 Duplex connected to surface mounted pump

Typical Set up - diagram shows and RF100 Duplex

Although they are self-cleaning, all of our products will require some maintenance every once in a while.

The nylon mesh filter cages can be gently washed with water and detergent, but should also be regularly replaced as the nylon mesh will deteriorate over time. Changing the filter head is very easy thanks to a quick release system.

How often will depend on your mesh size and what you are filtering.  As a minimum we recommend the following:

  • Mesh up to 115 microns should be cleaned or replaced after every 1000 hours of use
  • Mesh up to 250 microns should be cleaned or replaced after every 5000 hours of use

Full maintenance guidelines can be found in the instruction manual available from the download link above.

All our products are guaranteed for a year.  Full details in our Terms and Conditions.

Why Rotorflush?

3d printing rotorflush parts

Designed & Manufactured in the UK

All our products are made to order, and many can be made to customer specifications.

  • Built to meet your requirements
  • Screen dirty water down to 60 microns
  • Made to order in the UK
Newts (and weed etc) not being sucked into a pump thanks to RF100 Triplex filter.

Experts in Water Screening and Filtration

Our products and expertise have been appreciated by satisfied customers for over 2 decades.

  • Industry experts for over 20 years
  • 1000's of products in use worldwide
  • Successfully screening 10 - 7,225 US GPM / 2 - 1,640 m3 hr
  • Our products keep water flowing by protecting pumps, screens, spray bars…….
  • .…nozzles, heat exchangers and other connected equipment from blocking
Self-cleaning pond filter

Worldwide Delivery and Service

Through our worldwide distribution network, we offer the ability to:

  • Deliver filters and strainers worldwide
  • Help service your filter or strainer
  • Repair a broken filter or strainer (whatever you've done to it…)

Talk to Our Experienced Staff

Call us now on 01297 560 229 | 8am - 5pm UK time

Or leave us a message and a member of our expert, friendly team will call you back and will find the filter pump for your needs.

  •     We work with you to identify your issues
  •     We can design & build a custom solution
  •     We can deliver our solution worldwide
We’ll Help You Find the Right RF100 for You
We’ll Help You Find the Right RF100 for You

OR Call us on: 01297 560229

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

cad drawing of a filter on a guide rail